(Al-Furat Al-Awsat Technical University, Iraq)(2) Ahmad Taha Abdulsadda
(Al-Furat Al-Awsat Technical University, Iraq)(3) Hassanain Ghani Hameed
(Al-Furat Al-Awsat Technical University, Iraq)*corresponding author
AbstractAdvancements in drone technology make them important in many areas. military, industry, and disaster The efficacy of a drone's communication systems can be greatly impacted by temperature fluctuations, either from environmental conditions or mechanical problems in the drone's construction. This study gives an analysis and computational model of the impact of temperature on the performance of drone communication. Utilizing a one-dimensional convolutional neural network, we aim to forecast the signal-to-noise ratio (SNR) and received signal strength indicator (RSSI). Following the initial stage of dataset creation in the drone laboratory, proceed to reprocess the dataset and divide it into a 70% training set and a 30% testing set. Subsequently, a graphical user interface (GUI) was developed using MATLAB App Designer to enhance user friendliness. The outcome suggests that the efficiency of the drone communication system  declines with rising temperatures.  Using 1DCNN is our contribution to this work; other studies depend only on simulation to assess performance. One benefit of 1DCNN is that the impact may be evaluated by automatically extracting important features from the input dataset. Using 1DCNN is our special addition to this project; other research evaluate the UAV communication system's effectiveness only through simulation. We propose in this work to optimize system characteristics for improved performance, including power transfer, by adding a feedback loop between the CNN result and the communication system. Furthermore, we investigate how different weather conditions, such wind and rain, affect UAV communication systems.
KeywordsDrone Communication Systems; Temperature Effect; Signal-to-Noise Ration (SNR); 1DCNN; RSSI
|
DOIhttps://doi.org/10.31763/ijrcs.v4i3.1353 |
Article metrics10.31763/ijrcs.v4i3.1353 Abstract views : 752 | PDF views : 162 |
Cite |
Full Text Download
|
References
[1] K. Telli et al., “A comprehensive review of recent research trends on unmanned aerial vehicles (uavs),†Systems, vol. 11, no. 8, p. 400, 2023, https://doi.org/10.3390/systems11080400.
[2] P. Chu, Y. T. Huang, C. Pi, and S. Cheng, “Autonomous Landing System of a VTOL UAV on an Upward Docking Station Using Visual Servoing,†IFAC-PapersOnLine, vol. 55, no. 27, pp. 108-113, 2022, https://doi.org/10.1016/j.ifacol.2022.10.496.
[3] N. Sethi and S. Ahlawat, “Low-fidelity design optimization and development of a VTOL swarm UAV with an open-source framework,†Array, vol. 14, p. 100183, 2022, https://doi.org/10.1016/j.array.2022.100183.
[4] T. Patel, M. Kumar, and S. Abdallah, “Control of Hybrid Transitioning Morphing-wing VTOL UAV,†IFAC-PapersOnLine, vol. 55, no. 37, pp. 554-559, 2022, https://doi.org/10.1016/j.ifacol.2022.11.241.
[5] M. Bahari, M. Rostami, A. Entezari, S. Ghahremani, and M. Etminan, “A comparative analysis and optimization of two supersonic hybrid SOFC and turbine-less jet engine propulsion system for UAV,†Fuel, vol. 319, p. 123796, 2022 https://doi.org/10.1016/j.fuel.2022.123796.
[6] M. Bahari, M. Rostami, A. Entezari, S. Ghahremani, and M. Etminan, “Performance evaluation and multi-objective optimization of a novel UAV propulsion system based on PEM fuel cell,†Fuel, vol. 311, p. 122554, 2022, https://doi.org/10.1016/j.fuel.2021.122554.
[7] K. Zhou et al., “A kW-level integrated propulsion system for UAV powered by PEMFC with inclined cathode flow structure design,†Applied Energy, vol. 328, p. 120222, 2022, https://doi.org/10.1016/j.apenergy.2022.120222.
[8] M. Stamate, C. Pupăză, F. Nicolescu, and C. Moldoveanu, “Improvement of Hexacopter UAVs Attitude Parameters Employing Control and Decision Support Systems,†Sensors, vol. 23, no. 3, p. 1446, 2023, https://doi.org/10.3390/s23031446.
[9] N. Li, X. Liu, B. Yu, L. Li, J. Xu, and Q. Tan, “Study on the environmental adaptability of lithium-ion battery powered UAV under extreme temperature conditions,†Energy, vol. 219, p. 119481, 2021, https://doi.org/10.1016/j.energy.2020.119481.
[10] J. Jin, S. Kim, and J. Moon, “Development of a Firefighting Drone for Constructing Fire-breaks to Suppress Nascent Low-Intensity Fires,†Applied Sciences, vol. 14, no. 4, p. 1652, 2024, https://doi.org/10.3390/app14041652.
[11] D. Häusermann et al., “FireDrone: Multiâ€Environment Thermally Agnostic Aerial Robot,†Advanced Intelligent Systems, vol. 5, no. 9, p. 2300101, 2023, https://doi.org/10.1002/aisy.202370038.
[12] K. Wang, Y. Yuan, M. Chen, Z. Lou, Z. Zhu, and R. Li, “A study of fire drone extinguishing system in high-rise buildings,†Fire, vol. 5, no. 3, p. 75, 2022, https://doi.org/10.3390/fire5030075.
[13] S. Zheng, W. Wang, and Z. Liu, “Design and research of forest farm fire drone monitoring system based on deep learning,†6GN for Future Wireless Networks, pp. 215-229, 2021, https://doi.org/10.1007/978-3-031-04245-4_19.
[14] R. A. Jaber, M. S. Sikder, R. A. Hossain, K. F. N. Malia and M. A. Rahman, “Unmanned Aerial Vehicle for Cleaning and Firefighting Purposes,†2021 2nd International Conference on Robotics, Electrical and Signal Processing Techniques (ICREST), pp. 673-677, 2021, https://doi.org/10.1109/ICREST51555.2021.9331147.
[15] S. Zheng, W. Wang, Z. Liu, and Z. Wu, “Forest farm fire drone monitoring system based on deep learning and unmanned aerial vehicle imagery,†Mathematical Problems in Engineering, vol. 2021, no. 1, pp. 1-13, 2021, https://doi.org/10.1155/2021/3224164.
[16] M. O. Alade, “Investigation of the effect of ground and air temperature on very high frequency radio signals,†Journal of Information Engineering and Applications, vol. 3, no. 9, pp. 16-21, 2013, https://www.iiste.org/Journals/index.php/JIEA/article/view/7207.
[17] C. A. Boano, J. Brown, Z. He, U. Roedig, and T. Voigt, “Low-power radio communication in industrial outdoor deployments: The impact of weather conditions and ATEX-compliance,†Sensor Applications, Experimentation, and Logistics, vol. 29, pp 159–176, 2010, https://doi.org/10.1007/978-3-642-11870-8_11.
[18] R. Umar et al., “Preliminary study of radio astronomical lines effect of rain below 2.9 GHz,†Jurnal Teknologi, vol. 75, no. 1, pp. 7-11, 2015, https://doi.org/10.11113/jt.v75.3984.
[19] L. Zhenzhong, M. Nezih, X. George, O. Yuu, L. Guocheng, and B. Dayan, “Effects of temperature and humidity on UHF RFID performance,†International Workshop Smart Materials, Structures & NDT in Aerospace, 2011, https://www.ndt.net/article/ndtcanada2011/papers/102_Li.pdf.
[20] A. A. Segun, A. M. Olusope, and A. H. Kofoworola, “Influence of air temperature, relative humidity and atmospheric moisture on UHF radio propagation in South Western Nigeria,†International Journal of Science and Reserch, vol. 4, no. 8, pp. 588-592, 2015, https://www.ijsr.net/archive/v4i8/SUB157273.pdf.
[21] Y. S. Meng, Y. H. Lee and B. C. Ng, “The Effects of Tropical Weather on Radio-Wave Propagation Over Foliage Channel,†IEEE Transactions on Vehicular Technology, vol. 58, no. 8, pp. 4023-4030, 2009, https://doi.org/10.1109/TVT.2009.2021480.
[22] J. Luomala and I. Hakala, “Effects of temperature and humidity on radio signal strength in outdoor wireless sensor networks,†2015 Federated Conference on Computer Science and Information Systems (FedCSIS), pp. 1247-1255, 2015, https://doi.org/10.15439/2015F241.
[23] C. A. Boano, M. Zúñiga, J. Brown, U. Roedig, C. Keppitiyagama and K. Römer, “TempLab: A testbed infrastructure to study the impact of temperature on wireless sensor networks,†IPSN-14 Proceedings of the 13th International Symposium on Information Processing in Sensor Networks, pp. 95-106, 2014, https://doi.org/10.1109/IPSN.2014.6846744.
[24] M. Numan et al., “A Systematic Review on Clone Node Detection in Static Wireless Sensor Networks,†IEEE Access, vol. 8, pp. 65450-65461, 2020, https://doi.org/10.1109/ACCESS.2020.2983091.
[25] H. Wennerström, F. Hermans, O. Rensfelt, C. Rohner and L. -Å. Nordén, “A long-term study of correlations between meteorological conditions and 802.15.4 link performance,†2013 IEEE International Conference on Sensing, Communications and Networking (SECON), pp. 221-229, 2013, https://doi.org/10.1109/SAHCN.2013.6644981.
[26] C. Huang et al., “Artificial Intelligence Enabled Radio Propagation for Communications—Part II: Scenario Identification and Channel Modeling,†IEEE Transactions on Antennas and Propagation, vol. 70, no. 6, pp. 3955-3969, 2022, https://doi.org/10.1109/TAP.2022.3149665.
[27] A. Mishra, S. Bagui and J. Compo, “Design and Testing of a Real-Time Audio-Quality Feedback System for Weather Broadcasts and a Framework for a Weather Broadcast Transmission Technology Switch,†IEEE Access, vol. 7, pp. 158782-158797, 2019, https://doi.org/10.1109/ACCESS.2019.2950306.
[28] M. Tamura et al., “A 0.5-V BLE Transceiver With a 1.9-mW RX Achieving −96.4-dBm Sensitivity and −27-dBm Tolerance for Intermodulation From Interferers at 6- and 12-MHz Offsets,†IEEE Journal of Solid-State Circuits, vol. 55, no. 12, pp. 3376-3386, 2020, https://doi.org/10.1109/JSSC.2020.3025225.
[29] A. J. Onumanyi, A. M. Abu-Mahfouz and G. P. Hancke, “Cognitive Radio in Low Power Wide Area Network for IoT Applications: Recent Approaches, Benefits and Challenges,†IEEE Transactions on Industrial Informatics, vol. 16, no. 12, pp. 7489-7498, 2020, https://doi.org/10.1109/TII.2019.2956507.
[30] M. Massaoudi, I. Chihi, L. Sidhom, M. Trabelsi and F. S. Oueslati, “Medium and Long-Term Parametric Temperature Forecasting using Real Meteorological Data,†IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, pp. 2402-2407, 2019, https://doi.org/10.1109/IECON.2019.8927778.
[31] M. Mafuta, M. Zennaro, A. Bagula, G. Ault, H. Gombachika, and T. Chadza, “Successful deployment of a wireless sensor network for precision agriculture in Malawi,†International Journal of Distributed Sensor Networks, vol. 9, no. 5, p. 150703, 2013, https://doi.org/10.1155/2013/150703.
[32] R. Marfievici, A. L. Murphy, G. P. Picco, F. Ossi and F. Cagnacci, “How Environmental Factors Impact Outdoor Wireless Sensor Networks: A Case Study,†2013 IEEE 10th International Conference on Mobile Ad-Hoc and Sensor Systems, pp. 565-573, 2013, https://doi.org/10.1109/MASS.2013.13.
[33] F. Yuan, Y. H. Lee, Y. S. Meng, S. Manandhar and J. T. Ong, “High-Resolution ITU-R Cloud Attenuation Model for Satellite Communications in Tropical Region,†IEEE Transactions on Antennas and Propagation, vol. 67, no. 9, pp. 6115-6122, 2019, https://doi.org/10.1109/TAP.2019.2916746.
[34] I. S. Lee, J. H. Noh, S. J. Oh, “A Survey and analysis on a troposcatter propagation model based on ITU-R recommendations,†ICT Express, vol. 9, no. 3, pp. 507-516, 2023, https://doi.org/10.1016/j.icte.2022.09.009.
[35] F. A. Semire, R. Mohd-Mokhtar, I. A. Akanbi, “Validation of new ITU-R rain attenuation prediction model over Malaysia equatorial region,†MAPAN, vol. 34, pp. 71-77, 2019, https://doi.org/10.1007/s12647-018-0295-z.
[36] C. A. Boano, N. Tsiftes, T. Voigt, J. Brown and U. Roedig, “The Impact of Temperature on Outdoor Industrial Sensornet Applications,†IEEE Transactions on Industrial Informatics, vol. 6, no. 3, pp. 451-459, 2010, https://doi.org/10.1109/TII.2009.2035111.
[37] C. Hsieh, J. Chen and B. Nien, “Deep Learning-Based Indoor Localization Using Received Signal Strength and Channel State Information,†IEEE Access, vol. 7, pp. 33256-33267, 2019, https://doi.org/10.1109/ACCESS.2019.2903487.
[38] K. Ohshima, H. Hara, Y. Hagiwara and M. Terada, “Field investigation of the radio transmission performance and distance in a environmental wireless sensor network,†The International Conference on Information Network 2012, pp. 132-137, 2012, https://doi.org/10.1109/ICOIN.2012.6164364.
[39] M. Shahid et al., “Link-Quality-Based Energy-Efficient Routing Protocol for WSN in IoT,†IEEE Transactions on Consumer Electronics, vol. 70, no. 1, pp. 4645-4653, 2024, https://doi.org/10.1109/TCE.2024.3356195.
[40] D. Gotterbarn, K. Miller and S. Rogerson, “Computer society and ACM approve software engineering code of ethics,†Computer, vol. 32, no. 10, pp. 84-88, 1999, https://doi.org/10.1109/MC.1999.796142.
[41] V. A. Mardiana, T. Adiono, S. Harimurti, M. M. M. Dinata, A. Mitayani and G. N. Nurkahfi, “APSoC Architecture Design of 2.4 GHz ZigBee Baseband Transceiver for IoT Application,†2019 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET), pp. 74-78, 2019, https://doi.org/10.1109/ICRAMET47453.2019.8980407.
[42] D. Zhou, “Theory of deep convolutional neural networks: Downsampling,†Neural Networks, vol. 124, pp. 319-327, 2020, https://doi.org/10.1016/j.neunet.2020.01.018.
[43] S. Jhong et al., “An Automated Biometric Identification System Using CNN-Based Palm Vein Recognition,†2020 International Conference on Advanced Robotics and Intelligent Systems (ARIS), pp. 1-6, 2020, https://doi.org/10.1109/ARIS50834.2020.9205778.
[44] A. Al-Azzawi, A. Ouadou, H. Max, Y. Duan, J. J. Tanner, and J. Cheng, “DeepCryoPicker: fully automated deep neural network for single protein particle picking in cryo-EM,†BMC Bioinformatics, vol. 21, no. 59, pp. 1-38, 2020, https://doi.org/10.1186/s12859-020-03809-7.
[45] X. Xu and H. Liu, “ECG Heartbeat Classification Using Convolutional Neural Networks,†IEEE Access, vol. 8, pp. 8614-8619, 2020, https://doi.org/10.1109/ACCESS.2020.2964749.
[46] G. Li, M. Zhang, J. Li, F. Lv, and G. Tong, “Efficient densely connected convolutional neural networks,†Pattern Recognition, vol. 109, p. 107610, 2021, https://doi.org/10.1016/j.patcog.2020.107610.
[47] J. Gu et al., “Recent advances in convolutional neural networks,†Pattern Recognition, vol. 77, pp. 354-377, 2018, https://doi.org/10.1016/j.patcog.2017.10.013.
[48] W. Fang, P. E. D. Love, H. Luo, and L. Ding, “Computer vision for behaviour-based safety in construction: A review and future directions,†Advanced Engineering Informatics, vol. 43, p. 100980, 2020, https://doi.org/10.1016/j.aei.2019.100980.
[49] D. Palaz, M. Magimai-Doss, and R. Collobert, “End-to-end acoustic modeling using convolutional neural networks for HMM-based automatic speech recognition,†Speech Communication, vol. 108, pp. 15-32, 2019, https://doi.org/10.1016/j.specom.2019.01.004.
[50] H. Li, Z. Deng, and H. Chiang, “Lightweight and resource-constrained learning network for face recognition with performance optimization,†Sensors, vol. 20, no. 21, p. 6114, 2020, https://doi.org/10.3390/s20216114
[51] D. H. Hubel and T. N. Wiesel, “Receptive fields, binocular interaction and functional architecture in the cat’s visual cortex,†The Journal of Physiology, vol. 160, no. 1, p. 106-154, 1962, https://doi.org/10.1113/jphysiol.1962.sp006837.
[52] L. Jiao and J. Zhao, “A Survey on the New Generation of Deep Learning in Image Processing,†IEEE Access, vol. 7, pp. 172231-172263, 2019, https://doi.org/10.1109/ACCESS.2019.2956508.
[53] S. Kim, Z. W. Geem, and G. Han, “Hyperparameter optimization method based on harmony search algorithm to improve performance of 1D CNN human respiration pattern recognition system,†Sensors, vol. 20, no. 13, p. 3697, 2020, https://doi.org/10.3390/s20133697.
[54] A. Krizhevsky, I. Sutskever, and G. E. Hinton, “ImageNet classification with deep convolutional neural networks,†Communications of the ACM, vol. 60, no. 6, pp. 84–90, 2017, https://doi.org/10.1145/3065386.
[55] K. Simonyan and A. Zisserman, “Very deep convolutional networks for large-scale image recognition,†arXiv preprint arXiv, 2014, https://doi.org/10.48550/arXiv.1409.1556
[56] N. Srivastava, G. Hinton, A. Krizhevsky, I. Sutskever, and R. Salakhutdinov, “Dropout: a simple way to prevent neural networks from overfitting,†The journal of machine learning research, vol. 15, pp. 1929-1958, 2014, https://www.cs.toronto.edu/~rsalakhu/papers/srivastava14a.pdf.
[57] D. Shi, Y. Ye, M. Gillwald, and M. Hecht, “Designing a lightweight 1D convolutional neural network with Bayesian optimization for wheel flat detection using carbody accelerations,†International Journal of Rail Transportation, vol. 9, no. 4, pp. 311-341, 2021, https://doi.org/10.1080/23248378.2020.1795942.
[58] O. Avci, O. Abdeljaber, S. Kiranyaz, and D. Inman, “Structural damage detection in real time: implementation of 1D convolutional neural networks for SHM applications,†Structural Health Monitoring & Damage Detection, Volume 7, pp. 49-54, 2017, https://doi.org/10.1007/978-3-319-54109-9_6.
[59] O. Abdeljaber, O. Avci, S. Kiranyaz, M. Gabbouj, and D. J. Inman, “Real-time vibration-based structural damage detection using one-dimensional convolutional neural networks,†Journal of Sound and Vibration, vol. 388, pp. 154-170, 2017, https://doi.org/10.1016/j.jsv.2016.10.043.
[60] O. Avci, O. Abdeljaber, S. Kiranyaz, B. Boashash, H. Sodano, and D. J. Inman, “Efficiency validation of one dimensional convolutional neural networks for structural damage detection using a SHM benchmark data,†Qspace Instutional Repository, pp. 4600-4607, 2018, http://hdl.handle.net/10576/30622.
[61] O. Abdeljaber, O. Avci, M. S. Kiranyaz, B. Boashash, H. Sodano, and D. J. Inman, “1-D CNNs for structural damage detection: Verification on a structural health monitoring benchmark data,†Neurocomputing, vol. 275, pp. 1308-1317, 2018, https://doi.org/10.1016/j.neucom.2017.09.069.
[62] T. Ince, S. Kiranyaz, L. Eren, M. Askar and M. Gabbouj, “Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks,†IEEE Transactions on Industrial Electronics, vol. 63, no. 11, pp. 7067-7075, 2016, https://doi.org/10.1109/TIE.2016.2582729.
[63] S. Kiranyaz, A. Gastli, L. Ben-Brahim, N. Al-Emadi and M. Gabbouj, “Real-Time Fault Detection and Identification for MMC Using 1-D Convolutional Neural Networks,†IEEE Transactions on Industrial Electronics, vol. 66, no. 11, pp. 8760-8771, 2019, https://doi.org/10.1109/TIE.2018.2833045.
[64] O. Abdeljaber, S. Sassi, O. Avci, S. Kiranyaz, A. A. Ibrahim and M. Gabbouj, “Fault Detection and Severity Identification of Ball Bearings by Online Condition Monitoring,†IEEE Transactions on Industrial Electronics, vol. 66, no. 10, pp. 8136-8147, 2019, https://doi.org/10.1109/TIE.2018.2886789.
[65] L. A. Al-Haddad, A. A. Jaber, P. Neranon, and S. A. Al-Haddad, “Investigation of Frequency-Domain-Based Vibration Signal Analysis for UAV Unbalance Fault Classification,†Engineering and Technology Journal, vol. 41, no. 7, pp. 915-923, 2023, https://doi.org/10.30684/etj.2023.137412.1348.
[66] Z. Zhang, P. Cui and W. Zhu, “Deep Learning on Graphs: A Survey,†IEEE Transactions on Knowledge and Data Engineering, vol. 34, no. 1, pp. 249-270, 2022, https://doi.org/10.1109/TKDE.2020.2981333.Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Ahmed Hussein Abbas
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| About the Journal | Journal Policies | Author | Information |
International Journal of Robotics and Control Systems
e-ISSN: 2775-2658
Website: https://pubs2.ascee.org/index.php/IJRCS
Email: ijrcs@ascee.org
Organized by: Association for Scientific Computing Electronics and Engineering (ASCEE), Peneliti Teknologi Teknik Indonesia, Department of Electrical Engineering, Universitas Ahmad Dahlan and Kuliah Teknik Elektro
Published by: Association for Scientific Computing Electronics and Engineering (ASCEE)
Office: Jalan Janti, Karangjambe 130B, Banguntapan, Bantul, Daerah Istimewa Yogyakarta, Indonesia